Drum conveyor line is a kind of machine that can convey material with large weight or bear large impact load. It is suitable for conveying all kinds of boxes, bags, pallets and other items. Bulk, small items or irregular items need to be conveyed on pallets or in turnaround boxes.

Coating Line for Driving Shaft

Structural form: According to the driving mode, it can be divided into dynamic drum line and non-dynamic drum line. According to the layout, it can be divided into horizontal drum line, inclined drum line and turning drum line. It can also be specially designed to meet the requirements of all kinds of customers. The inner widths of standard gauge drums are 200, 300, 400, 500, 1200 mm, etc. Other special specifications can also be adopted according to customer requirements. The standard turning radius of the turning drum line is 600, 900, 1200 mm, etc. Other special specifications can also be adopted according to customer requirements. The diameter of straight drum is 38, 50, 60, 76, 89mm, etc.

Conveyor equipment conveyor equipment manufacturers of drum conveyor line materials are: carbon steel, stainless steel, aluminum, PVC, plastic steel. The driving modes of the drum conveyor line are as follows: the speed reduction motor drive of the coating line of the steam drive shaft and the electric roller drive. The speed regulation modes of drum conveyor line include frequency conversion speed regulation and electronic speed regulation.

Applications: Electronic, beverage, food, packaging, machinery, electronics, light industry, tobacco, chemical industry, medicine, rubber and plastics, automobile and friction, logistics and other industry transmission modes: single sprocket, double sprocket, O-belt, plane friction belt, synchronous belt, etc., line shaft drive. Equipment features: It is easy to connect and filter between drum conveyor lines. It can be used to compose complex logistics conveying system and shunt and confluence system with multiple powder coating lines and other conveying equipment or special units to meet various technological needs.

Roller length selection: Cargo with different widths should be selected to fit the width of the roller, in general, the use of "conveyor + 50mm". Selection of wall thickness and shaft diameter of roller: According to the weight of conveyor, it is evenly distributed to the contacting roller, and the required load of each roller is calculated, so as to determine the wall thickness and shaft diameter of the roller. Roller material and surface treatment: According to the different conveying environment, determine the material and surface treatment (galvanized carbon steel, stainless steel, blackening or glue). Choose the installation mode of roller: According to the specific requirements of the whole conveyor, choose the installation mode of roller: spring press type, inner dental shaft type, flat tenon type, through-shaft pinhole type, etc. For the conical roller of bender, the width and taper of roll surface depend on the size of cargo and turning radius.